Locating A Particular Point In A Track - Sony MDS-PC2 Operating Instructions Manual

Playing a Specific Track
Playing a track by entering the track
number
Press the number button(s) to enter the number of the
track you want to play.
To enter a track number over 10
1
Press >10 (see the examples below).
2
Enter the corresponding digits.
To enter 0, press 10/0 instead.
Examples:
• To play track number 30, press >10 once, then 3 and
10/0.
• To play track number 108, press >10 twice, then 1,
10/0, and 8.
z
If you enter a track number while the deck is paused
The deck will still be paused at the beginning of the track.
24 GB
Locating a Particular Point
in a Track
You can locate a particular point in a track during play or
play pause.
Z
H
z
.
m/M
m
Locating a point while monitoring the
sound
Hold down m/M (or ./> on the deck) during
play.
You will hear intermittent playback as the disc goes
forward or reverse. When you reach the point, release the
button.
Notes
• If the disc reaches the end while you're pressing M, the deck
stops.
• Tracks that are only a few seconds long may be too short for
monitoring. For such tracks, play the MD at normal speed.
Locating a point by observing the time
indication
Hold down m/M (or ./> on the deck) during
play pause.
The elapsed playing time of the track appears in the
display. When you reach the point, release the button.
No sound is output during this time.
z
When "- Over -" appears in the display
The disc has reached the end while you're pressing M. Press
. or m to go back.
` / 1
– +
X
x
>
+
M
–