Synchro-Recording With The Audio Component Of Your; Recording) - Sony MDS-JB940 Operating Instruction

Synchro-recording with 7%]
the audio component of
your choice (Music Synchro-
recording)
'The Music Synchro-recording allows you to automatically
synchronize recording to the MD deck with the playing
sd program source. The Track Marking
jon, however, will differ according to the program
source. For details, see "Marking track numbers wi
recording" on page 19,
music SYNC
1 Do stops 1 to 5 of "Recording to an MO" on
page 14.
2 Press MUSIC SYNC.
The deck changes to recording pause
3 start playing the program source.
Recording stars automatically
To stop Music Synchro-recording
Press M
Note
During Music Synchro-recording, Smart Space and Auto C
regardless of their setting ("S.Space On" or
ofr",
When the deck is connected to a Sony CD player or Hi-Fi
'component system, you can easily copy the contents of
CDs to the MD using the deck's remote. Because the MD
remote operates both the MD deck and the CD player or
CD player section of the component system, make sure 10
place the MD deck and the CD player as close together as
possible.
CD-SYNC START
co-svwc stor
CD PLAYER
CD PLAYER Hem
co-sync STANDBY
1 Turn on the amplifier and the CD player, and select
CD on the amplifier.
2 Do steps 210 5 of "Recording to an MD" on
page 14.
3 insert a CD into the CD player and select the
playing mode (Shuffle Play, Program Play, etc.) on
the CD player.
4 Press CD-SYNC STANDBY.
5 Press CD-SYNC START.
The deck starts recording and the CD player starts to
play.
"The track number and elapsed recording time of the
track appear in the display.
If the CD player does not start playing
'Some CD players may not respond when you press CD-
SYNC START. Press U on the CD player's remote
instead to start play on the CD player.
samo Supo ff