Locating A Specific Track; Ams Function - Sony MXD-D400 Operating Instructions (primary manual) Operating Instructions Manual

Locating a specific track

— AMS Function

CD/MD
H
./>
.AMS>
(CD)
Set to CD or MD in CD MD select switch.
You can quickly locate any track by using the
AMS (Automatic Music Sensor) control on the
deck, . and > buttons on the remote, or
number buttons on the remote.
To locate Do this
The next or During playback, press
succeeding tracks turn AMS clockwise) until you
find the track.
The beginning of During playback, press
the current or turn AMS counter clockwise) until
preceding tracks you find the track.
A specific track While the deck is stopped, press
. or
by using AMS
press H (or AMS).
Tips
• To go quickly to the beginning of the last track, press
. (or turn AMS counter clockwise) in stop mode.
• To pause playing at the beginning of a track, press
>
. or
(or turn AMS) after pausing playback.
Number buttons
.AMS>
(MD)
>
(or
.
(or
>
(or turn AMS), then
Playing a track by entering the
track number
You can also select the desired track using the
remote during Normal Play. Press the number
button(s). Playback automatically starts.
To enter a track number over 10
1
Press >10 once if it is a 2-digit track number,
and twice if it is a 3-digit track number.
2
Enter the corresponding digits for the same
number of "–" flashing in the display.
To enter 0, press 10/0.
Examples:
• To enter 6 while "– – –" flashes in the display, press
10/0, 10/0 and 6.
• To enter 100 while "– – –" flashes in the display,
press 1, 10/0 and 10/0.
GB
13