BMW R 12 nineT 2023 Rider's Manual page 102

96 OPERATION
ating the handbrake or foot-
brake lever.
If the brake is actuated for
approximately one second
after the vehicle has come to
a standstill and the motor-
cycle is on a gradient of at
least 3 %, Hill Start Control
Pro is automatically activated.
The selected setting remains
stored even after the ignition
is switched off.
with Digital Display
Navigate to
Select
HSC PRO
To switch off Hill Start Con-
trol Pro, select
Hill Start Control Pro is deac-
tivated.
To switch on manual Hill Start
Control Pro, select
Hill Start Control Pro can be
activated by forcefully oper-
ating the handbrake or foot-
brake lever.
To switch on automatic Hill
Start Control Pro, select
Hill Start Control Pro can be
activated by forcefully oper-
ating the handbrake or foot-
brake lever.
If the brake is actuated for
approximately one second
after the vehicle has come to
a standstill and the motor-
cycle is on a gradient of at
OE
,
SETUP VEHICLE
.
.
Off
.
On
Auto
least 3 %, Hill Start Control
Pro is automatically activated.
The selected setting remains
stored even after the ignition
is switched off.
Operating Hill Start Control
Pro
Requirement
Vehicle stationary and upright,
engine running.
ATTENTION
.
Non-availability of Hill Start
Control
Risk of accident
Apply the brakes manually
to hold the vehicle.
Hill Start Control Pro is
purely a comfort system
that facilitates hill starts and
consequently, is not to be con-
fused with a parking brake.
Hill Start Control Pro
should not be used on
.
gradients steeper than 40 %.