BMW R 12 nineT 2023 Rider's Manual page 93

Anti-theft alarm (DWA) is act-
ive.
Switch off the ignition.
( 76)
Press button 1 on the radio-
operated key twice.
Activation takes approximately
30 seconds to complete.
Turn indicators flash twice.
Confirmation tone sounds
twice (if programmed).
Anti-theft alarm is active.
To deactivate the tilt sensor
(for example if you are about
to transport the motorcycle
on a train and the swaying
movement of the moving train
could trip the alarm), press
button 1 on the radio-oper-
ated key again during the ac-
tivation phase.
Turn indicators flash three
times.
Confirmation tone sounds
three times (if programmed).
Tilt sensor is deactivated.
Alarm signal
A DWA alarm can be triggered
by:
Tilt sensor
An attempt to use an unau-
thorised ignition key to switch
on the ignition.
Disconnection of the DWA
anti-theft alarm from the
vehicle battery (DWA internal
battery in the anti-theft alarm
provides power – acoustic
alarm only, the turn indicators
do not flash).
When the radio-operated
key is within range, an
alarm triggered by the tilt alarm
sensor is suppressed.
All functions are sustained even
if the internal battery of the
DWA anti-theft alarm system is
flat; the only difference is that
an alarm cannot be triggered
if the system is disconnected
from the vehicle's battery.
87