Lubricate the friction face of
spacer bushing 4.
Lubricant
Unirex N3
Insert spacer bushing 4,
turned with the collar facing
out, into the wheel hub on the
left-hand side.
ATTENTION
Front wheel installed wrong
way round
Risk of accident
Note direction-of-rotation
arrows on tyre or rim.
Roll the front wheel into posi-
tion between the forks of the
front suspension.
Lubricate quick-release axle 3.
Lubricant
Unirex N3
WARNING
Improper installation of the
quick-release axle
Loosening of the front wheel
After securing the brake cal-
ipers and relieving the front
forks, tighten the quick-
release axle and the axle
clamping to the specified
tightening torque.
Lift the front wheel and insert
quick-release axle 3.
Remove front-wheel stand
and firmly compress front
forks several times. Do not
operate the handbrake lever
in this process.
Install the front-wheel stand.
(
156)
169