Table of Contents
Advertisement
multifocal lenses to be sufficiently able to see traf-
fic including via the displays.
%
If the camera on top of the roof at the rear is
dirty, the image may be impaired. In this case,
clean the camera manually with a damp cloth.
Observe the notes on cleaning the digital
inside rearview mirror (
/
To use the standard inside rearview mirror:
#
move the switch to position 1.
To use the display: move the switch to position
#
2.
Adjusting the display brightness
%
The digital inside rearview mirror is equipped
with light sensors on the front and back and
automatically adjusts the brightness of the dis-
play to the ambient light. Do not cover the
light sensors, e.g. with a sticker.
Press menu button
3
once.
#
Press button
4
to reduce the display bright-
#
ness.
or
Press button
5
to increase the display bright-
#
ness.
Adjusting the angle of the camera
3
Press menu button
twice.
#
Press button
4
to move the angle down-
#
wards.
or
Press button
5
to move the angle upwards.
#
Activating and deactivating the rear view camera
image
The vehicle may be equipped with a rear view cam-
era with image in the inside rearview mirror.
To activate, put the vehicle in reverse gear or
#
press button 5.
To deactivate, take the vehicle out of reverse
#
gear or press button
5
Error mode of the digital inside rearview mirror
If a system error occurs, e.g. if the camera fails, a
crossed-out camera will appear at the top left of
the display and no camera image will be visible in
the mirror.
Switch to the standard inside rearview mirror if
#
there is a system error.
If the vehicle is equipped with a rear view camera
with image in the inside rearview mirror and a sys-
tem error occurs, a crossed out camera with the
number 2 will appear on the left side of the display.
In this case, no camera image is available for
maneuvering.
Dimming the inside rearview mirror
page 176).
#
again.
Light and vision
Fold anti-glare lever
1
in the direction of the
arrow.
85
Advertisement
Table of Contents
