Table of Contents
Advertisement
Light and vision
84
Adjusting the outside mirrors electrically
Example image
* NOTE Damage to the electric outside mir-
rors due to folding in by hand or by force
If the electric outside mirrors are folded in or
out manually, the outside mirrors may be dam-
aged and will not engage properly.
If the outside mirrors are not folded when you
have the vehicle washed at an automatic car
wash, the washing brushes may forcibly fold in
and damage the outside mirrors.
Fold the outside mirrors in and out elec-
#
trically only.
Fold in the outside mirrors before having
#
the vehicle washed at an automatic car
wash.
Before setting off, switch on the power supply
#
or the vehicle.
To fold in or out: briefly press button 2.
#
To select: use button
1
#
outside mirror to be adjusted.
To adjust: use button
4
#
the mirror glass.
To engage an outside mirror that has been
#
pushed out of position: press and hold button
2.
You will hear a click and the mirror will audibly
engage in position. The outside mirror will be
set to the correct position.
Resetting the outside mirrors
%
If the battery has been disconnected or com-
pletely discharged, the outside mirrors must
#
#
Heating the outside mirrors
#
#
Using the digital inside rearview mirror
The vehicle may be equipped with a digital inside
rearview mirror. This uses a camera on top of the
roof at the rear to provide a better view to the rear.
The inside rearview mirror can be used either as a
standard inside rearview mirror or as a display.
To prevent glare from the digital inside rearview
mirror, first set the digital inside rearview mirror as
the standard inside rearview mirror.
Digital image noise may occur on the display under
or
3
to select the
certain circumstances in unfavorable ambient
light.
to set the position of
Certain types of sunlight, e.g. sun low on the hori-
zon or light from another intense light source, can
reduce the display's contrast and cause it to
become too bright. In such situations, objects on
the display may be obscured or difficult to see. In
these cases, be particularly careful and adapt your
driving style accordingly.
Drivers must always wear the necessary personal
visual aids required for them to drive a vehicle.
Drivers with presbyopia (age-related long-sighted-
ness) should, if necessary, wear visual aids with
be reset. Only then will the automatic mirror
folding function work properly.
Switch on the power supply or the vehicle.
Briefly press button 2.
Vehicles without a rear window heater: at low
temperatures, the mirror heater will switch on
automatically once the vehicle has been star-
ted.
Vehicles with a rear window heater: at low tem-
peratures, the mirror heater will switch on
automatically once the vehicle has been star-
ted. The mirror heater can also be switched on
together with the rear window heater using the
rear window heater button.
Advertisement
Table of Contents
