How Chemical Supplies Can Cause Damage; Dangerous Chemical Supplies And Wash Formulas; Incorrect Configuration Or Connection Of Equipment - Milnor MWF36J8 Installation Manual

Table of Contents

Advertisement

Important Installation Precautions
connect the chemical pump system to the machine,
write wash formulas that control the chemical concentrations.
The company that does these procedures must make sure that these procedures do not cause dam-
age. Pellerin Milnor Corporation accepts no responsibility for chemical damage to the ma-
chines it makes or to the goods in a machine.
2.3.1

How Chemical Supplies Can Cause Damage

Dangerous Chemical Supplies and Wash Formulas

can cause damage are:
a very high concentration of chlorine bleach,
a mixture of acid sour and hypo chlorite,
chemical supplies (examples: chlorine bleach, hydrofluosilicic acid) that stay on the stainless
steel because they are not quickly flushed with water.
The book "Textile Laundering Technology" by Charles L. Riggs gives data about correct chemi-
cal supplies and formulas.

Incorrect Configuration or Connection of Equipment

systems:
do not prevent a vacuum in the chemical tube (for example, with a vacuum breaker) when the
pump is off,
do not prevent flow (for example, with a valve) where the chemical tube goes in the machine.
Damage will occur if a chemical supply can go in the machine when the chemical system is off.
Some configurations of components can let the chemical supplies go in the machine by a siphon
(Figure 10, page
41). Some can let chemical supplies go in the machine by gravity
page
42).
40
BNUUUR02.R01 0000160548 B.2 B.5 E.3 10/1/21, 11:24 AM Released
— Some examples that
— Many chemical
(Figure 11,
Pellerin Milnor Corporation

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mwf36z8Mwf45j8Mwf45z8

Table of Contents