IBM 9006-22P Servicing page 19

Figure 2. Removing the 3.5-inch drive from the tray
• A 2.5-inch drive slides out of the tray.
a. Turn the tray upside down as shown in Figure 3 on page 6.
b. Open the retention spring (A) as shown in Figure 4 on page 7.
c. Lift the 2.5-inch drive (B) out of the tray.
d. Close the retention spring.
e. Turn the tray right side up.
Removing and replacing parts in the 9006-22P 5