Technics SC-CH730 Operating Instructions Manual page 16

Table of Contents

Advertisement

For extra tuning convenience, the SC-CH730 let you take advantage
of the Radio Data System (RDS) in areas where RDS broadcast
services are received. This advanced system simplifies operation
and provides useful information, utilizing a 57 KHz subcarrier above
the audible range, in addition to the main FM signal.
What is RDS (Radio Data System)?
RDS is a multiplex broadcasting system which adds a variety of
message signais to the audio signals of FM broadcasts.
This system can utilize the following signals among the various RDS
signals.
RDS messages used by this system:
@PS (Program service name):
Name of the broadcast station
®@PTY (Program type):
Identification
signal
for program
types such as news and sport
"PTY" may not be available in some areas. (Future function)
Functions of this system which use RDS
To display the name of a broadcast station (PS
display):
When this system receives a PS signal in an RDS broadcast, the
name of the broadcast station is shown on the display. (For details,
see the right of this page.)
To search for a program of a particular type, such
as news or sport (PTY search):
When you wish to listen to a particular type of program, a program of
that type can be searched.
Furthermore, while the PTY signal is being received, the name of the
type of program currently being broadcast can be shown on the
display. (For details, see page 17.)
Even if an FM broadcast station is transmitting RDS signals, the
functions of this system may not be able to utilize these signals if the
signal quality is too poor.
To display the name of a broadcast
station
DISP MODE
O
(When the FM station is received)
Press DISP MODE.
If the FM broadcast being received pro-
vides the RDS service ("RDS" indicator
will light), the name of the broadcast sta-
tion and "PS" indicator will be shown on
the display of this system.
DISP MODE
&
Example of PS display
mae reer"
oan
ee
"RDS" indicator
Each time you press the button, the dis-
play will change as follows.
Frequency display PS display
oe
4
PTY display
(For PTY displays, see page 17.)
elf the FM broadcast being received does not provide the RDS
service, "NO RDS" wiil be displayed when PS display mode or PTY
display mode is selected.
elf a PTY signal is not being received, "NO PTY" will be displayed
when the PTY display mode is selected.

Advertisement

Table of Contents
loading

Table of Contents