Switch On The Power - Technics SC-CH730 Operating Instructions Manual

These instructions explain how to set the timer for 16:25 (4:25 p.m.)
on Wednesday.
I POWER Switch on the power.
C1,
Within 8 seconds:
@ Press SET.
@ TUNING / TIMER @) Press TUNING/TIMER v or
A to select the day.
@ yiniey men GQ Press TUNING/TIMER v or
A to select the hour.
@ SET
Cand) @) Press SET.
@ Press SET to finish setting
the time.
The display will return to the previous
display after about 3 seconds.
When "SUN 0:00" flashes:
It flashes when you connect the AC mains lead for the first time or if
there has been a power failure.
If this happens, reset the time.
If the minutes setting has gone wrong:
1. Press TIMER/CLOCK.
2. Press SET 3 times.
3. Press TUNING/TIMER v or a to set the minutes, and then press
SET.
To display the clock again:
Press TIMER/CLOCK.
The clock display will appear for about 8 seconds.