Editing Button Configurations - Visioneer Strobe XP 450 Installation Manual

7. To set the new configuration for use by the scanner button, select
the configuration and then click OK.
E B C
DITING UTTON ONFIGURATIONS
You cannot edit the preset button configurations; you can only edit
those configurations that you created yourself.
To edit a configuration:
1. Open the Configuration dialog box.
2. Select the configuration you want to edit. The selection must be a
configuration you created.
3. Click the Edit button.
The Edit Scan Configuration dialog box opens.
4. Edit the settings as required and click OK.
5. Click OK to close the Configuration dialog box.
C S
ONFIGURING THE CANNER
B 19
UTTON