Configuring The Scanner Button; About The Configuration Dialog Box - Visioneer Strobe XP 450 Installation Manual

C
ONFIGURING THE
When you first connect your scanner to a computer, the scanner's
OneTouch software is configured to scan in black and white and send
the scanned image to the PaperPort desktop. You can change the
settings by selecting new options from the Configuration dialog box.
To open the Configuration dialog box:
1. On the Windows taskbar, click Start, point to Programs, point to
2. If not already selected, click the Scan tab on the Configuration
A
BOUT THE
The Configuration dialog box manages settings for the scanner button.
In the following figure, the button is set to scan with the configuration
named Scan Document and then open PaperPort to display the scanned
image. The Format and Page(s) option is set is to scan in the PaperPort
image format.
Select a software
application to
send the scanned
document to.
S
ScanSoft PaperPort 9.0, and then click OneTouch Configure.
dialog box to display available scanning configurations.
C
ONFIGURATION
C
ONFIGURING THE
B
CANNER UTTON
D B
IALOG OX
S B 13
CANNER UTTON
Click to set
preferences.
Select a setting
for scanning
the item.
Select format