Step 4: Connect The Usb Cable - Visioneer Strobe XP 450 Installation Manual

13. When you see the Connect Scanner window, do NOT click Finish.
Leave the window open and proceed to the next section, "Step 4:
Connect the USB Cable".
S 4: C
TEP ONNECT THE
The Visioneer Strobe XP 450 scanner connects to any available USB
port. Check your computer's manual for USB port locations.
Note: You can connect the scanner to your computer while the
computer is running. You do not have to shut down your computer.
1. Plug the USB cable into the USB port on the scanner and then a
USB port on the computer. The ports are identified USB symbols.
S 4: C
TEP ONNECT THE
USB C
ABLE
USB
USB C 9
ABLE