Chapter 4: Maintenance; Cleaning The Automatic Document Feeder - Visioneer Strobe XP 450 Installation Manual

50 V S
ISIONEER TROBE
XP 450 S I
CANNER NSTALLATION
Maintenance
This chapter contains information on maintenance, troubleshooting,
uninstalling, scanner specifications, and spare parts.
C A
LEANING THE
You may need to clean the ADF feed mechanism if your documents do
not feed easily into the ADF, or several feed in at the same time.
To clean the ADF:
1. Wet a cotton swab with some isopropyl alcohol (95%).
2. Press the ADF cover release on the top left of the scanner body to
open the automatic document feeder cover.
3. Wipe the feed roller from side to side. Rotate the roller to clean its
entire surface.
4. Wipe the pad from top to bottom. Be careful not to snag the swab
on the springs on either side of the pad.
5. Close the cover when you're finished.
G
UIDE
D
UTOMATIC OCUMENT
F
EEDER