Editing Or Deleting Scan Configurations - Visioneer Strobe XP 220 User Manual

66 V S
ISIONEER TROBE
XP 220 S U '
CANNER SER S
E D
DITING OR ELETING
Note: Your scanner comes with a number of configurations pre-set at
the factory. We recommend that you keep those configurations locked
and do not edit or delete them. That way, you will always have the
factory settings available. If you do edit or delete them, and want to
get the factory pre-sets back again, you will need to uninstall then re-
install your scanner.
To edit or delete a scan configuration:
1. Open the OneTouch Properties window.
2. Select the scan configuration you want to edit or delete.
3. To delete the configuration, click the Delete button.
Note: If the Delete button is not available, the selected configuration
is locked and cannot be deleted. You must first click the Edit button
and unlock the configuration, as explained in the next steps.
G
UIDE
S C
CAN ONFIGURATIONS
Select the configuration to
edit or delete. It must be
unlocked, as indicated by
not having a lock displayed
here.