Editing Or Deleting Scan Configurations - Visioneer Patriot 430 User Manual

74 V P
ISIONEER ATRIOT
430 S U ' G
CANNER SER S UIDE
Scan to multiple storage folders:
1. Insert the documents you want to scan to multiple storage folders.
2. Press the Destination Selector buttons on the scanner to get to one
of the buttons set up for scanning to storage.
3. Press the Simplex or Duplex button to scan the documents.
4. When scanning is finished, re-insert the documents and press the
Destination Selector buttons to get to the next button you have set
up for scanning.
5. Press the Simplex or Duplex button to scan the documents.
When scanning is finished, the documents are stored in the two separate
folders.
E D
DITING OR ELETING
Note: Your scanner comes with a number of configurations pre-set at
the factory. We recommend that you keep those configurations
locked and do not edit or delete them. That way, you will always have
the factory-settings available. If you do edit or delete them, and want
to get the factory pre-sets back again, you will need to uninstall then
re-install your scanner driver.
S C
CAN ONFIGURATIONS