Table of Contents
Advertisement
Move the power
switch toward the
rear direction and
hold it there for one
second until the
power indicator goes
on before releasing it.
3
Read the LIMITED USE LICENSE AGREEMENT
(o-page 42)
Confirm that the floppy disk drive is installed.
Before removing the seal covering the power switch, please read the LIMITED USE LI¬
CENSE AGREEMENT. Removal of this seal indicates agreement to the terms specified. To
open the display, slide the latch located at the front and lift open the display. After you have
agreed to the terms, you may turn your computer on.
• Do hot slide the power switch repeatedly.
• After you have turned your computer ofT, you must wait ten seconds before you can
turhiit back on.
^
j
^
Set Windows up
The [Windows 95 Setup] will run after the computer is turned on. Simply follow the on¬
screen instructions.
Xnote)->
• Please read the supplemental "Windows 95 Setup Procedure" for a more detailed
explanation (C^page 45).
• Moving the cursor (/^) or clicking buttons can be done through the touch pad (C^page 10).
• If the display or the sound quality is not right, you can adjust the brightness and
volume (c^page 48).
Inserting a floppy disk
Label-side up
Label on the top surface, and
inserting the shutter-side
headfirst.
Ejecting a floppy disk
Eject Button
Double-click
(Panasonic Setup icon) on Windows
One 2HD formatted floppy disk needs to be prepared. First, write "Firstaid FD" on a blank
label, then stick this label on the floppy disk. Simply follow the on-screen instructions.
-
• Please store the "Firstaid FD" in a safe place. It will enable you to return your computer
to factory condition shodid any problems occur.
• Do not remove the floppy disk while the FDD indicator ([^ ) is on, power down your
computer or use4he suspend function f
page II).
*
-
^Non;-
5
-
About the CF-63 Quick Guide
• This is available as an on-line guide which includes information on the key input com¬
mands, Status LCD, DVD player and the "CF-63 Readme*'". The "CF-63 Readme*'"
also contains detailed information.
• For the Quick Guide, we recommend setting the Desktop area to "1024 by 768 pixels"
and the Color palette to "High Color (16 bits)" or more.
' Depending on the model, some informtuion may not be available in the Readme file.
This concludes the first-time use operation guidelines.
7
Advertisement
Table of Contents
