Table of Contents
Advertisement
Add-ons/Peripherals
Label-side up
# Installing a PC Card
Simply slide the PC Card in until it snaps into place.
Please refer to the manual for each card on how to install the card (insertion is
typically label-side up).
3
Turn your computer on
There are some PC Cards that require a special or updated device driver be installed.
Follow the instructions on the screen and read any related manuals on how to install
device drivers.
Xnote)-^-.
You may need to install a driver from the Windows 95 CD (included) or a PC Card's
floppy disk. Simply follow the on-screen instructions and read the PC Card's operation
manual on how to install the driver.
CardBus:
• You may experience noise when using a CardBus card, inserted in the PC Card slot.
Also, please note that a parallel device in the ECP mode may not function.
Do not use the ECP mode and disable the sound chip (in Setup Utility - Supervisor
Setup - Sound chip and Parallel Port Mode) when using a CardBus card.
• Use a CardBus card alone with no other card inserted.
V___
y
Adding Memory
31.7 mm (1.25")
or less
modules are extremely sensitive to static eiectriciiy, jlhere are cases where static
{^electricity generated by the human body has adwreepafieet0 such modules. In addition,
"it is easy to damage the RAM modules or internal components of the computer. Therefore,
when installing or removing a RAM module, handle the module with extreme care.
RAM module specifications
144 pins, 60/70 ns, 3.3 V
SO-DIMM, EDO
RAM Module Slot
Installing/Removing the RAM Module
1
Power off your computer
(opage 11)
Do not shut down using the suspend or hibernation mode.
Memory cover
Do not install or remove peripherals while your computer is in the suspend ( ^) or
I hibernation ( ^ and
mode; abnormal operation may result.
2
Remove the multimedia pocket device (o^page 13)
Remove the memory cover
emTiiON
Do not touch the terminals or internal components, insert objects other than the
module, or allow foreign particles to enter. Doing so has been known to cause
damage, fire or electric shock.
Installing the RAM module
(1) Slide in the module at an angle.
(
2
) Snap the module into place by pushing down on it.
Advertisement
Table of Contents
