Table of Contents
Advertisement
7 To shut down, save all data and select [Shut Down] from the
[Start] menu
z/noteI-V
From the keyboard,
you may choose to press down on ^ , then select [Shut Down].
Confirm shutdown
Press I
to confirm shutdown. Your computer will power off automatically.
(In the OFF state, if you are not recharging your battery pack or if the pack is fully charged, your computer
consumes approximately 1.5W.)
# Restarting your computer
(without shutting down)
Select
t'
yw
1 after selecting [Restart the computer?].
A
NOTE )->
To quickly resume computer operation after shutting down,
the suspend and hibernation functions are available (C?below).
r
Restarting your computer in MS-DOS mode
Select |L.
' | after selecting [Restart the computer in MS-DOS mode?].
When returning to Windows 95 from the MS-DOS mode, type ''EXIT' and not "WIN'
Returning to Windows 95 using the "WIN" command may result in a malfunction.
Starting Up Your Computer Quickly
If you want to immediately start up and continue an application after shutting down your com¬
puter, you can do so by using the suspend or hibernation function.
9 Differences between the suspend function and hibernation function
Function
~
Where data is saved to
Speed
Requires power supply
Suspend function
Memory_Fast_Yes (if power is cut, all data is lost)
I Hibernation function
Hard disk
Somewhat slow
Power not required to maintain data
Shutting Down
# Using the suspend function
/^noteI-
Suspend Mode
You can use the suspend function by selecting [Suspend]* from the [Start] menu.
[Suspend] is deleted from the [Start] menu by unchecking [Allow Windows to manage power use on
this computer.] in [Start] • [Settings] - [Control Panel] - [Power] or by unchecking [Show suspend
command on Start menu] in [Advanced].
11
Advertisement
Table of Contents
