Table of Contents
Advertisement
# Display
Even after powering on, no
display
• The brightness can be adjusted with Q
+
|[ti|](}^
• When purchasing the computer, the display setting has been preset for an external display If
you connect an external display, the screen is displayed on the external display
• When there is no display to an external display,
• Check your cable connection for the external display
• Confirm your display is on
• If your computer is connected to an external display and the internal LCD has been set to
"off, and the computer is placed in the hibernation or suspend mode, the internal LCD
will remain in the "ofT' mode if the external display is not connected when the computer
is restarted In this case re-connect the external display and reboot the computer
The power has not been cut,
but after a certain period of
time, there is no display
• Has the computer been set to the power-saving mode'
When © IS displayed, the computer is in the Standby Mode To resume operation of
your computer, press any key
• To save power, your computer may have automatically entered the hibernation mode
When © and ^ are displayed on the Status LCD, the computer is in the Hibernation
Mode ((;
5
>page 12)
An afterimage appears
If an image is displayed for a prolonged period of time, an afterimage may appear This is
not a malfunction The afterimage will disappear when a different screen is displayed
The motion of the mouse
cursor is not smooth
Select [Start]-[Settingsj-[Control Panel]-[Mouse]-[Motion] and check [Show pointer trails]
# Disk (Disc) Operations
Cannot readAvrite to a
• Has the floppy disk been correctly inserted''
floppy disk
• Has the floppy disk been correctly formatted '
• Your floppy disk drive may not have been properly set in the multimedia pocket
• Has the Setup Utility been used to set [Floppy Operation] to [Enable]'
Unable to write to a floppy
disk
Is the floppy disk write-protected' q* page 5
How to format a floppy disk
Select [Format] in [My Computer] - [3 1/2 Floppy (A )] - [File]
After confirming the disk
is unclear
volume and format type, click ..itart""']
Unable to read/write to the
hard disk
Unable to access DVD drive
• Your drive or file may not have been properly set
• Check to see if the hard disk is full If it is full, delete unnecessary files
• Your hard disk content may be corrupted Consult your nearest Panasonic dealer
• Has the Setup Utility been used to set [DVD Operation] to [Enable]'
• The drive is sensitive to dust and other foreign matter, cleaning may be required Or, the
disc may be disfigured, have scratches making reading impossible, or dirty
• For information on trouble shooting concerning the DVD Player, please refer to the CF-63
Quick Guide available as an on-line manual on the hard disk
Unable to remove the disc
To remove a disc when the computer is off
(j) Remove the multimedia pocket device ((^ page 13)
©Turn the knob to as far as it will go in the clockwise
direction
35
Advertisement
Table of Contents
