Mitsubishi MELIMP Series Instruction Manual page 90

8.5 Setting of the Operation Pattern
8.5.1 Running speed region...................................................................... 8-24
BASIC Pr. 1
BASIC Pr. 2
Pr. 13
Pr. 31 to 36
BASIC Pr. 78
8.5.2 Acceleration time and deceleration time .......................................... 8-26
BASIC Pr. 7
BASIC Pr. 8
Pr. 20
Pr. 21
Pr. 44
Pr. 45
Pr. 110
Pr. 111
8.5.3 Acceleration/deceleration patterns................................................... 8-28
Pr. 29
8.5.4 Stopping operation........................................................................... 8-29
Pr. 10
Pr. 11
Pr. 250
8.5.5 Selection of regenerative brake unit................................................. 8-30
Pr. 30
Pr. 70
8.5.6 Stall prevention operation level ........................................................ 8-31
Pr. 22
Pr. 156
8.5.7 Selection of motor tone .................................................................... 8-32
Pr. 72
8.5.8 Other settings .................................................................................. 8-32
Pr. 9
Pr. 84
Pr. 244
Pr. 990
"maximum speed"
"minimum speed"
"minimum motor speed"
"speed command jumps 1A to 3B"
"reverse rotation prevention selection"
"acceleration time"
"deceleration time"
"acceleration/deceleration reference speed"
"acceleration/deceleration time unit"
"second acceleration time"
"second deceleration time"
"third acceleration time"
"third deceleration time"
"acceleration/deceleration pattern"
"braking voltage operation speed"
"braking voltage operation time"
"coasting-to-stop setting"
"regenerative brake option selection"
"regenerative brake duty"
"stall prevention operation level"
"stall prevention operation selection"
"motor tone selection"
"electronic thermal O/L relay"
"rated motor speed"
"cooling fan operation selection"
"buzzer control"
8-3
Get other manuals https://www.bkmanuals.com
8 PARAMETER FUNCTIONS
8-24
8