Mitsubishi MELIMP Series Instruction Manual page 101

Pr. 902 "speed setting voltage bias"
Pr. 903 "speed setting voltage gain"
You can set the relationship between the magnitude of the speed setting analog voltage signal input
to the terminal 2 and the motor speed. 0V of the speed setting signal corresponds to approx. 0%,
and 5V or 10V (depending on Pr. 73 setting) to approx. 100%.
Pr.
Motor speed
902 0 to 2000
903 1 to 3000
Setting Range
Unit
r/min
2000
Bias
Factory setting
Pr. 902
0
Speed setting signal (%)
8-14
Get other manuals https://www.bkmanuals.com
8 PARAMETER FUNCTIONS
Initial value
Approx. 0/0
Approx. 100/2000
Speed setting
signal
0.0 to 300.0
0.0 to 300.0
Gain
Pr. 903
100
Unit
%