3. Boot up the Version Up Software and Version Up Procedure
1. Boot up the "MAX+plus II 10.1 Programmer Only" software from start menu of Windows.
(1). On the main window, select tab "MAX+plus II" and then "Programmer".
(2). On the main window (Programmer window is displayed), select tab "Option" and then "Hardware Setup".
(3). On the Hardware Setup dialog, set the "Hardware Type" to "ByteBlaster(MV)".
2. On the main window, select tab "JTAG" and then "Restore JCF".
3. On the dialog of Save JCF, select the "jcf" format file (Chain file) and then press the "OK" button.
INF-2