Boot Up The Ver. Up Software And Ver. Up Procedure - Panasonic DVCPRO AJ-CA901P Service Manual

4-3. Boot up the Ver. Up software and Ver. Up procedure

1. Boot up the "MAX+plus II 9.6 programmer only" software.
2. On main window, select tab "MAX+plus II" and then "Programmer".
3. On main window (programmer window is displayed), select tab "Option" and then "Hardware
setup".
4. On Hardware Setup dialog, set the "Hardware Type" to "ByteBlaster (MV)".
5. On main window, select tab "File" , "Project" and then "Name".
6. On dialog of project Name, select the "TDF format file" or "POF format file" and then press "OK"
button.
INF-6