10. Removal of the Fan Motor
1.
Unscrew the 2 screws (L).
2.
Disconnect the connector (P10), and remove the
Fan Motor.
11. Removal of the RF Unit
1.
Loosen the 4 screws (M), and disconnect the
connector.
2.
Unscrew the 2 screws (N).
(P10)
(L)
(M)
(M)
(N)
3.
Disconnect the connector (J1), and remove RF Unit.
(J1)
12. Removal of the C.B.A. Guide Rail
1.
Unscrew the 4 screws (O).
2.
Unscrew the 2 screws (P), and remove the Guide
rail.
(O)
Note : Assemble procedures are reverse of the
disassemble procedures.
DIS-5
(O)
(P)