Panasonic DVCPRO AJ-CA901P Service Manual page 124

8. Click the "Program" button on Programmer dialog.
9. When Progress Bar reaches at the point of 100, the message "Programming Complete" appears, then
PLD version upgrade is completed. Click "OK" button on the Programming complete message Dialog.
®
* MAX+PLUS II is registered trade mark of ALTERA
® ®
* Windows 95 and Windows 98 are registered trade mark of Microsoft
®
Corporation in the United States and/or other countries.
®
corporation in the United States and/or other countries.
INF-10
Progress bar