4. Removal of the Left Side Case
1.
Unscrew the screw (E).
2.
Unscrew the 2 screws (F).
3.
Disconnect the connector (P10,11,EXT DC IN),
and remove the Left Side Panel.
5. Removal of the Back Case
1. Unscrew the 5 screws (G) and screw (H).
2. Disconnect the connector (P2), and remove the
Back Case.
(G)
(H)
(G)
(F)
(E)
(P11)
(P10)
EXT DC IN
P2
(G)
6. Removal of the Connection Case
1. Unscrew the 2 screws (I).
2. Unscrew the 2 screws (J) and disconnect the
connector.
3.
Unscrew the screw (K) and disconnect the GND
line.
4.
Remove the Connection Case carefully.
(K)
Note : Assemble procedures are reverse of the
disassemble procedures.
DIS-2
(I)
(J)