Panasonic DVCPRO AJ-CA901P Service Manual page 123

3. Chick the "Add" button on the "Multi-Device JTAG Chain Setup" screen.
4. Repeat the steps 2 and 3 to capture the "pof" file.
5. Click the "Save JCF" button. Then, the "Save JCF" screen is displayed.
6. Enter a file name, and click the "OK" button.
7. Click the "OK" button on the "Multi Device JTAG Chain Setup" screen. Then, the following message is
displayed : Multi-device JTAG chain mode, which is needed to use the information entered in this dialog
box, is off. Do you want to switch to the multi-device JTAG chain mode ?
When this message is displayed, click "YES".
INF-9