Panasonic DVCPRO AJ-CA901P Service Manual page 136

9. Click "File Open" button.
10. Select version-up data file (xxxx.mot format file) and then click "Open" button. (See Figure 4-3)
11. On main window, click "Start writing" button and data transfer will be started from PC to camcorder. (It takes
about two-minutes)
12. When a message "Completes Writing of file: xxxx.mot", appears software version upgrade is completed.
13. Turn off the power of camcorder and then set SW201 [LOAD] to original position.
Fig. 4-2 Flash 1 for windows main window
Fig. 4-3 Open file dialog
INS-6
Initial Bit Rate : 9600bps
Maximum Bit Rate : 9600bps
CPU Type : H8/3048F
COM Port : COM1 or COM2
Verify : Check mark ON
Language : English