Preparation; Connection - Panasonic DVCPRO AJ-CA901P Service Manual

4-1. Preparation

Equipment
CPLD WRITER
D-sub 25pin-25pin Cable
Version Upgrade Software
Version Upgrade Data
Personal Computer

4-2. Connection

1. Connect the D-sub cable between CN201 (for ALTERA) connector of the CPLD WRITER (VFK1590)
and Personal computer (Printer port).
2. Connect the CPLD WRITER cable (VFK1590P2K or VFK1590P2H) between connector on objective
PCB and P201 connector of CPLD WRITER. (Refer to Figure. 4-1.)
3. Turn On the power of AJ-BS900H, or AJ-CA900H and Personal computer (Windows
PC
AJ-YA901P/EN
VFK1590 (Interface board)
VFK1590P2G
(Connection cable for AJ-BS900HP/EN and AJ-YA901P/EN)
VFK1590P2H (Connection cable for AJ-CA900HP/EN)
Straight cable (Male - Female) , Length : Within 1 meter
MAX+plus II Software
Please download from www.altera.com/pub/software/asap2.exe
TDF or POF file (Included in "vsi xxxx" file)

With WINDOWS 95 or 98
D-SUB 25 pin cable
P201 Connector
VFK1590P2K or VFK1590P2H
AJ-BS900HP/EN
Fig. 4-1 Connection for CPLD version up
INF-5
Remark
CN201
Connector
VFK1590
AJ-CA900HP/EN

mode).