How to...
1. Install a FoodSaver
1. Pull open the built-in roll storage door in the back
of the appliance.
2. Insert the roll into the back of the appliance as
pictured.
3. Open up appliance lid fully so that it stays in place.
4. Thread end of roll forward through the opening on
the back between lid and appliance. pull through
the appliance until the end of roll is at the front
edge.
5. See next section for how to make a bag from a
FoodSaver Roll.
7
US: www.FoodSaver.com | CA: www.FoodSaver.ca | MX: www.oster.com.mx/foodsaver
VS5900 Series_23EFSM1.indd 7-8
VS5900 Series_23EFSM1.indd 7-8
Roll
®