Table of Contents
Advertisement
A�en�on
1. Please turn off power supply before installa�on.
2. Please ensure input voltage to be same as requirements from device.
3. Don't disassemble device if you are not expert, otherwise it will damage it.
4. Please do not use the light in the place with widely range metal area or strong electromagne�c
wave nearby, otherwise, the remote distance will be seriously affected.
Scan QR code to watch 2.4GHz series video instruc�on Or
enter into following link directly
h�ps://miboxer.com/light/video/1pc_remote.html
Made in China
Advertisement
Chapters
Table of Contents
