Table of Contents
Advertisement
6 - GLASS ASSEMBLY & DECORATIVE FRAME ASSEMBLY
E. EXTERIOR OUTER GLASS ASSEMBLY - NO MAGNETS
If you haven't already done so, install the exterior inner glass, and the exterior left, right and horizontal trim pieces. Refer to Pages 20-21.
Figure 6E.1
The exterior outer glass frame assembly will have bolt holes around the perimeter.
Set the glass in place such that the holes align with the holes on the exterior face of the
fireplace. Affix with the supplied 1/4-20 bolts.
F. EXTERIOR OUTER DECORATIVE GLASS FRAME
Figure 6F
Finally, set the exterior side decorative glass trim in place and use the longer 8-32 bolts supplied to affix the exterior outer glass assembly frame.
16400-7820 REV D
Figure 6E.2
The exterior side fully installed.
Page 27
Advertisement
Chapters
Table of Contents
