Physical And Electrical Characteristics; Channel Order - Focusrite Scarlett 2i2 Studio 4th Gen User Manual

Physical and Electrical Characteristics

Analogue Inputs
Connectors Two rear panel Neutrik® XLR connectors
Two front panel Neutrik® 6.35mm (1/4") jack sockets
Mic/Line switching Automatic
Connecting a 6.35mm jack to the front panel disables microphone input.
Phantom Power (48v) Front panel 48V (phantom power) button or switch in software
Line/Instrument switching Front panel Inst button or switch in software
Auto Gain Front panel Auto button or switch in software
Clip Safe Front panel Safe button.
AIR function Front panel Air button or switch in software
Analogue Outputs
Balanced Outputs Two rear-panel Neutrik®6.35mm (1.4") TRS jack sockets
Headphone Output Front panel stereo 6.35mm (1.4") TRS jack socket
Main Output Level Control Front panel analogue control with pre-fade output level meter
Headphones Level Control Front panel analogue control
Other I/O
USB
One USB 2.0 Type-C connector for data and power -
900mA
One USB Type-C power connector - 5V DC
4.5W
Front Panel Indicators
Channel Selection White/Green LEDs for channels 1 and 2
Select button White/Green Select LED
48V White/Green 48V LED (depending on the selected channel)
Inst White/Green Inst LED (depending on the selected channel)
Auto White Auto LED to initiate Auto Gain
Clip Safe White/Green Safe LED (depending on the selected channel)
Air Mode White/Green Air LED (depending on the selected channel)
Output Level Meter Three-colour LED ring around Output control.
USB
Green USB LED
Direct Monitor
Three-state LED
Weight and Dimensions
Weight 595g (1.31lbs)
Height 47.5mm (1.87")
Width 180mm (7.09")
Depth 117mm (4.60")
Scarlett 2i2 4th Gen Studio Pack User Guide
Operating Temperature

Channel Order

Input Channels
Input
1
2
3
4
Output Channels
Output
1
2
Note
Outputs 1 and 2 share the same feed as the Headphone Output. Whatever signal is
present at the line outputs you will also hear from the headphone output.
43
Environmental
40°C / 104°F Maximum ambient operating temperature
Channel
Input 1 (Mic/Line/Inst)
Input 2 (Mic/Line/Inst)
Loopback 1
Loopback 2
Channel
Output Left (Headphones Left)
Output Right (Headphones Right)