Manual Registration; Disabling Easy Start - Focusrite Scarlett 2i2 Studio 4th Gen User Manual

Manual Registration

If you decide to register your Scarlett at a later date, you can at:
You need to enter the Serial Number manually: you can find this number on the interface's base
(the white number below) or the barcode label on the giftbox.
We recommend you download and install Focusrite Control 2. Opening Focusrite Control 2
disables Easy Start and unlocks your Scarlett 2i2's full feature set.
In Easy Start mode, the interface functions at up to 48 kHz sample rate; once you install Focusrite
Control 2, you can work at sample rates up to 192 kHz.
If you don't install Focusrite Control 2 immediately, you can download it at any time from:
downloads.focusrite.com

Disabling Easy Start

After you've been through Easy Start, installed and opened Focusrite Control 2, your Scarlett is no
longer in Easy Start mode.
If your Scarlett 2i2 is still in Easy Start mode, or you have chosen not to install Focusrite Control 2
to disable Easy Start Mode:
1. Turn off your Scarlett 2i2
2. Press and hold the 48V button.
3. Keeping the 48V button held, power on your Scarlett 2i2.
4. Wait for the front panel to light up, then release the 48V button.
5. Restart (power off and power on) your Scarlett 2i2.
Your Scarlett powers on with Easy Start disabled.
Scarlett 2i2 4th Gen Studio Pack User Guide
customer.focusrite.com/register
8