Focusrite Scarlett 2i2 Studio 4th Gen User Manual page 20

Direct Monitor Adjustment
From Focusrite Control 2 you can enable and adjust the Direct Monitor mix to balance your inputs
with the Playback channels from your software.
To enable Direct Monitor click on the Direct tab in Focusrite Control 2 and click the Direct Monitor
software switch at the top of the tab. The switch lights green and Direct lights green on your
Scarlett 2i2's front panel.
Direct Monitor Off
To adjust your Direct Monitor mix:
1. Open Focusrite Control 2.
2. Click on the Direct tab.
3. Use the Mixer Channels, (faders, Mute and Solo buttons) to adjust the levels for
Analogue 1, Analogue 2 and Playback 1-2.
The final meter under Direct Monitor shows the combined level going to your monitor
and headphone outputs.
Scarlett 2i2 4th Gen Studio Pack User Guide
Direct Monitor on
20