Scarlett 2i2 4th Gen Studio Pack User Guide
Click to Reset the Peak Level meter.
When you overload the preamp, with too much input signal, or by adding too much gain, the
Peak Level Meter lights red. Hover over the Peak Level Meter and click to Reset the value.
The Input has clipped.
Click to Reset the Peak Level Meter after clipping.
Select Button
Many front panel controls on your Scarlett 2i2 are shared across the preamp inputs. The Select
button moves the preamp controls to different inputs.
At least one preamp is always selected, to change which preamp(s) the controls are affecting,
press the Select button. When you do this the newly selected preamp's number lights green and
the preamp setting lights change to match the new preamp.
When you turn on your Scarlett 2i2 the last selected preamp before you turned it off remains the
selected preamp.
13