Replacing Clock/Remote Battery - Panasonic Palmcorder PalmSight PV-L50 Operating Instructions Manual

Replacing Clock/Remote Battery
The clock and remote batteries are pre-installed. Follow the steps below if replacement
becomes necessary.
/ WARNING:-
Replace battery with Panasonic PART NO. VSBW0004 (CR2025) only. Use of another
battery may present a risk of fire or explosion.
Caution: Battery may explode if mistreated. Dispose of used battery promptly. Keep
away from children. Do not recharge, disassemble or dispose of in fire.
1
2
3
While pinching 2 tabs, pull Battery
Tray out.
Bend 1 tab to remove Battery.
Snap new Battery (© mark down)
into Battery Tray.
• Do not reverse the polarity.
4
Insert Battery Tray so the triangle
marks meet.
Note:
• Keep Battery out of children's reach.
Swallowing it may be harmful.
• Improperly installed, discharged, or
missing battery causes "CLOCK
BATTERY" to appear when DISPLAY is
pressed.
• Battery life is approximately 5 years.
Remote Battery
1
© While pressing stopper tab,
(s) puli Battery Tray out.
2
Insert battery into tray with
© mark down.
Do not reverse polarity.
3
Replace Battery Tray.
50
For assistance, please call: 1-800-211-PAN A(7262)
or send e-mail to : consumerproducts@panasonic.com