High Speed Shutter.36 - Panasonic Palmcorder PalmSight PV-L50 Operating Instructions Manual

High Speed Shutter
Improves Still or Slow Motion playback
picture of high speed subjects (e.g. a tennis
stroke), when viewed on Camcorder or 3
or 4 head VCR.
Before you begin...
• Connect Camcorder to power source.
• Set POWER to CAMERA.
• Insert cassette with record tab (page 15).
Auto Shutter
In AUTO mode (no indication in EVF or LCD Monitor), shutter speed is auto-adjusted
from 1/60 to 1/350 according to subject brightness.
• AUTO mode is selected each time POWER is set to CAMERA.
Manual Selection
The faster the shutter speed, the more light is needed for proper picture and color quality.
High Speed Shutter indication flashes if light is inadequate. Provide additional light.
1
2
Press HIGH SPEED SHUTTER
while recording.
Press repeatedly to change shutter
speed.
(See below, left.)
Note:
• Provide additional halogen or tungsten
light for use indoors or in poor light.
Fluorescent light degrades picture.
• Auto Focus may not function properly if
high speed shutter is used in inadequate
light.
• Setting reverts to AUTO each time
POWER is set to CAMERA.
36
For assistance, please call : 1-800-211-PANA(7262)
or send e-mail to : consumerproducts@panasonic.com