Security Mode.42 - Panasonic Palmcorder PalmSight PV-L50 Operating Instructions Manual

Security Mode
Before you begin...
• Connect Camcorder to power source.
Use AC Adaptor for longer recordings.
• Insert cassette with record tab (page 15).
• Set POWER to CAMERA.
• Securely position and aim Camcorder.
1
Press MENU for MENU mode.
Press UP A or DOWN ▼ to select
SECURITY
DISPLAY : Of
SEIF DEMO ; OFF
ipMiriBrfil ; OFF
VIDEO EFFECTS ; FADE
BLACK
SELECT: PUSH Y/A KEY
SET : PUSH DISPLAY KEY
END : PUSH MENU KEY
Press DISPLAY to select ON.
Motion Security may mistakenly start
when:
• background is plain, like a white wall, or
has distinct vertical, horizontal, or slanted
stripes,
like a
Venetian
blind.
• brightness suddenly changes.
Motion Security may not start when:
• motion is very slow or fast.
• moving object is very small.
• motion occurs only in 1 corner of viewing
area.
• in poor lighting (in this case, MOTION
SECURITY flashes).
• background is plain, like a white wall, or
has distinct horizontal or vertical stripes.
3
Press MENU to exit. (If cassette is
not inserted, W will flash.)
C N
r->
REC
MOTION MOTION
SECURITY SECURITY
stand-by
>_^
---
• Recording will start about 3 seconds
after motion is detected.
• Date and time are recorded if
displayed in EVF or LCD monitor
(page 21).
• Recording stops about 30 seconds
after motion ceases.
To cancel Security Mode, set POWER to
OFF.
Note:
• Security recording starts if Camcorder is
bumped or repositioned.
• This feature is not available during normal
- recording.
• While in Security stand-by, the
following functions are not available: Record/
Pause, Stand-by mode, Digital E.I.S., Video
Effects (Auto/Digital Fade).
42
For assistance, please call : 1-800-211-PANA(7262)
or send e-mail to : consumerproducts@panasonic.com