Regarding Other Control Number Correspondence - Roland VGA-5 Owner's Manual

Pedal Hold Function and MIDI Settings
Volume/Wah Control Number Setting
When the control numbers for the VGA-5 (the receiving device) and the foot controller (the transmitting device) are matched, you
can control volume and wah with the foot controller.
With the VGA-5, you can select from the following three volume and wah control numbers.
CHORUS REVERB
(fe)
When the DELAY When the CHORUS When the REVERB
Indicator is Lit Indicator is Lit Indicator is Lit
With a single expression pedal Select this setting when With two expression pedals
connected, you can use it as a connecting two expression connected, you can use them to
Pedal Function wah pedal when the wah effect pedals and using them for control the volume, except for
is on, and a volume pedal when independent control of the Number 7.
wah is off. volume and wah.
Volume Control Number : No. 7
Wah Control Number ; No. 16
* Set the above control numbers in the transmitting device as well.
Regarding Other Control Number Correspondences
The VGA-5 also handles the following control numbers.
¢ Switching Manual/Memory (No. 64)
* EFX On/Off (No. 65)
¢ Delay On/Off (No. 66)
¢ Chorus On/Off (No. 67)
¢ Reverb On/Off (No. 68)
* Tap Input (No. 80)
The control numbers are fixed.
What are Control Numbers?
These are the Control Change numbers (MIDI messages) transmitted when the foot controller is operated.
27