Table of Contents
Advertisement
Troubleshooting
Introduction
If your system does not operate correctly, re-read the instructions for the
procedures you have performed. If an error occurs within an application,
consult the documentation supplied with the software. This section identifies
solutions to some possible problems.
Troubleshooting checklist
Before turning on the system, make sure that:
The power cord is connected to the AC power-in connector and an AC
outlet.
The AC outlet is supplying power.
If a power strip is used, it is turned on and the circuit breaker is set.
The voltage selection switch on the system power supply reflects the
proper voltage.
Verifying your configuration
If your system is not operating correctly, the BIOS may contain an invalid
configuration parameter. Enter the BIOS Setup utility program and check your
configuration settings.
8
61
Introduction
Advertisement
Table of Contents
Troubleshooting
