Gateway E-3400 System Manual page 34

To install a second hard drive:
1
Turn off the system and disconnect the power cord, modem cord (if
installed), and all external peripheral devices.
2
Open the case (see "Opening the case" on page 15), observing the "Static
electricity precautions" on page 13.
3
Locate and remove the two screws that attach the mounting bracket to
the front of the chassis.
Mounting bracket
4
Remove the CD drive from the chassis so you can access the mounting
bracket. (See "3.5-inch diskette or CD drives" on page 22 for instructions
on removing the CD drive.)
5
Slide the mounting bracket towards the back of the chassis until the tabs
disengage from the chassis. Lift the mounting bracket out of the chassis.
Screws
Replacing or adding drives
27