Cleaning Your System; Cleaning The Mouse - Gateway E-3400 System Manual

Cleaning Your
System

Cleaning the mouse

If the mouse pointer on the screen moves erratically when you move the
mouse, the inside of the mouse may be dirty.
To clean the mouse:
1
Turn off the computer, then disconnect the mouse cable from the mouse
port.
2
Turn your mouse upside down and remove the roller ball cover.
3
Cup your hand under the mouse and turn your mouse right-side up. The
roller ball should drop into your hand. If it does not, gently shake the
mouse until the ball drops out of the socket.
4
Use adhesive tape to pick up any dust or lint on the surface of the ball.
Wipe away dirt or lint inside the ball socket. You can also blow into the
socket to remove dirt and lint. Use a cotton swab dipped in isopropyl
alcohol to clean the rollers inside the socket.
5
Let surfaces dry completely.
6
Return the ball to the socket and replace the cover.
7
Cleaning the mouse
59