3.10 Configuration Manager; 3.11 Splash Screen Loading - Garmin G1000 NXi Supplemental Maintenance Manual

3.10 Configuration Manager

All items listed in the Configuration Manager will display "Valid" in the
Status column.
Rotate the large FMS knob to select "SYSTEM".
Rotate the small FMS knob to select Configuration Manager page on PFD.
Press the softkey labelled CNFM CFG on PFD.
Press the ENT key on PFD to select OK when prompted to confirm configuration as
expected configuration.
Verify the fleet, aircraft expected and actual configuration IDs match.
If they do not match, repeat steps 2-4. If they match, continue to next step.
Open MFD and PFD circuit breakers.

3.11 Splash Screen Loading

When all software and configuration has been loaded, the splash screens must be loaded to the
display units (PFD and MFD).
Insert the software loader card in the upper slot of the MFD.
Cloe MFD circuit breaker.
When prompted to update system files, press the NO softkey.
When prompted to update splash screen files, press the YES softkey.
When the SYSTEM STATUS configuration page appears, Open the MFD circuit breaker.
Remove the loader card from the MFD and insert it into the upper slot of the PFD.
Close PFD circuit breaker.
When prompted to update system files, press the NO softkey.
When prompted to update splash screen files, press the YES softkey.
When the SYSTEM STAUTS configuration page appears, Open PFD circuit breaker.
G1000 NXi Supplemental Maintenance Manual
Textron Aviation G36/G58
NOTE
Page 3-32
190-02765-05
Revision 2