9.6
G1000 Backup Path Test
With both displays in normal mode and the entire avionics system turned on, verify on PFD
there is not a system alert message stating "Failed Data Path". If this message is present,
troubleshoot per Section 5.1.1 and resolve the issue before continuing.
9.7
Maintenance Records
Record the following information:
•
Part number of the G1000 software loader card used to perform software loading or
software updates.
•
Record part and serial numbers of any LRU which was replaced.
•
Record any database updates which were performed during maintenance.
•
Any other applicable information related to the maintenance work performed on the
aircraft.
G1000 NXi Supplemental Maintenance Manual
Textron Aviation G36/G58
Page 9-8
190-02765-05
Revision 2