Garmin G1000 NXi Supplemental Maintenance Manual page 41

GTS 820 without GTX 345R Software/Configuration Loading (if installed)
Follow this procedure to configure the GTS 820 Traffic System in the aircraft in those aircraft
that have a GTS 820 without a GTX 345R installed. Do not follow the procedures in this section
if the aircraft is not equipped with GTS 820 or if the aircraft has a GTS 820 and a GTX 345R.
Configuration of the GTS Processor will require entering the aircraft
registration number into the unit using Section 3.9 "Aircraft Registration
Number Entry".
Rotate the large FMS knob until the Item field is highlighted, rotate the small FMS knob
to activate the drop down menu. Rotate the small FMS knob and select "Baseline
Option – Legacy – GTS 820 without GTX 345 Installation" and press the ENT key to
select it.
Press the CHK All softkey.
Press the Load softkey.
Monitor the loading progress and verify the software load completes without errors as
indicated by the following:
•
Green "PASS" in the Configuration and Software columns for each item loaded.
•
"Upload Complete.............COMPLETE" in the summary box.
Press the ENT key to acknowledge the prompt that appears in the pop-up box.
G1000 NXi Supplemental Maintenance Manual
Textron Aviation G36/G58
NOTE
Page 3-25
190-02765-05
Revision 2