Mixer Oil Ie50 - APRILIA SR 50 Workshop Manual

SR 50
2.2.7.

MIXER OIL IE50

TOPPING UP
CAUTION The vehicle fits a control unit that manages an
electronic pump controlling the correct quantity of oil for
engine lubrication.
•
Remove the front cover, see (REMOVING THE
FRONT COVER).
• Remove plug.
• Fill with oil, see (LUBRICANT CHART)
• Refit plug.
AIR BLEED
CAUTION the vehicle fits a self-bleeding electronic pump.
Should oil in the mixer oil tank result used up or if the mixer
oil line is removed -from mixer to reed assembly- it is
necessary to bleed the system. Proceed as follows:
•
Completely open the throttle grip.
•
Keep the throttle open, turn the key to ON.
•
You will hear the noise of the pump.
•
Look at the mixer oil line going from the mixer to the
reed assembly and keep the throttle completely open
until the line is full of oil.
•
Release of the throttle twistgrip.
• If necessary, top up with mixer oil as described above.
WWW.PlanDeGraissage.ORG
PERIODIC MAINTENANCE
2 - 31